OCS分子在128 nm附近的光解动力学研究：S(3PJ=2,1,0)、S(1D2)以及S(1S0)产物通道

本文利用时间切片离子成像技术对OCS分子进行了真空紫外波段的光解动力学研究. 在四个光解光波长(从129.32到126.08 nm)下测量了硫原子解离产物S(³P_J=2,1,0)、S(¹D₂)、S(¹S₀)的速度影像，并从中清晰地发现了四个主要的解离产物通道：S(³P_J=2,1,0)+CO(X¹Σ⁺)，S(³P_J=2,1,0)+CO(A³π)，S(¹D₂)+CO(X¹Σ⁺)和S(¹S₀)+CO(X¹Σ⁺). 在实验影像中，产物CO分子的部分振动态结构能够得到分辨. 实验还获取解离产物总平动能谱，产物分支比和角分布. 对实验结果进行分析显示除绝热解离通道S(³P_J=2,1,0)+CO(A³π)之外，在其他三个产物通道中非绝热效应都起到非常重要的作用.     

Micro-Mesoporous Carbons from Cyclodextrin Nanosponges Enabling High-Capacity Silicon Anodes and Sulfur Cathodes for Lithiated Si-S Batteries

Manufactured globally on industrial scale, cyclodextrins (CD) are cyclic oligosaccharides produced by enzymatic conversion of starch. Their typical structure of truncated cone can host a wide variety of guest molecules to create inclusion complexes; indeed, we daily use CD as unseen components of food, cosmetics, textiles and pharmaceutical excipients. The synthesis of active material composites from CD resources can enable or enlarge the effective utilization of these products in the battery industry with some economical as well as environmental benefits. New and simple strategies are here presented for the synthesis of nanostructured silicon and sulfur composite materials with carbonized hyper cross-linked CD (nanosponges) that show satisfactory performance as high-capacity electrodes. For the sulfur cathode, the mesoporous carbon host limits polysulfide dissolution and shuttle effects and guarantees stable cycling performance. The embedding of silicon nanoparticles into the carbonized nanosponge allows to achieve high capacity and excellent cycling performance. Moreover, due to the high surface area of the silicon composite, the characteristics at the electrode/electrolyte interface dominate the overall electrochemical reversibility, opening a detailed analysis on the behavior of the material in different electrolytes. We show that the use of commercial LP30 electrolyte causes a larger capacity fade, and this is associated with different solid electrolyte interface layer formation and it is also demonstrated that fluoroethylene carbonate addition can significantly increase the capacity retention and the overall performance of our nanostructured Si/C composite in both ether-based and LP30 electrolytes. As a result, an integration of the Si/C and S/C composites is proposed to achieve a complete lithiated Si−S cell.     

信息时代的铌酸锂晶体:进展与展望

铌酸锂晶体具有非线性效应、电光效应、声光效应、光折变效应、压电效应与热释电效应等多种物理特性,在表面声波器件、光电器件、声光器件等方面获得广泛的应用。经历了六十多年的发展,铌酸锂晶体历久弥新,随着材料特性的不断开发,新功能、新器件、新应用层出不穷,尤其是铌酸锂单晶薄膜在薄膜滤波器、集成光电器件等领域的性能具有明显优势,被称为新一代信息和通信技术的关键材料。应用器件的发展正迫切要求基质晶体材料的发展,本文通过简述近年来铌酸锂的新发现、新应用,相应地探讨了铌酸锂晶体未来发展方向。     

单斜ZnP2负极材料的锂化机理及性能

过渡金属磷化物电位低且比容量高, 是有发展前景的锂离子电池(LIBs)负极材料. 其中, ZnP₂属于双活性负极材料, Zn与P都能与Li⁺发生反应, 储Li⁺性能更具有竞争力. 但是, 对于ZnP₂的锂化机理及产物尚不明确. 采用第一性原理计算和电化学测试方法研究了ZnP₂的电子性质和电化学性能, 通过理论计算和实验测试相结合阐述了ZnP₂的锂化机制. 首先, 以密度泛函理论(DFT)计算揭示了ZnP₂的锂化机理、Li⁺扩散路径、势垒和理论比容量(1477 mAh/g). 其次, 通过直流电弧等离子体法及固相烧结法合成ZnP₂, 并测试其首圈放电曲线, 显示放电容量为1439 mAh/g, 与理论计算结果相近. 此外, 薄膜X射线衍射(XRD)检测最终产物成分为LiZn和Li₃P, 与DFT计算结果一致.     

Molecular Bridging Enables Isolated Iron Atoms on Stereoassembled Carbon Framework To Boost Oxygen Reduction for Zinc-Air Batteries

Realizing the synergy between active site regulation and rational structural engineering is essential in the electrocatalysis community but still challenging. Here, a matrix-confined co-pyrolysis strategy based on molecular bridging is demonstrated to realize highly dispersed Fe atoms on stereoassembled carbon framework. Both polyacrylonitrile matrix and organic linker from metal–organic frameworks (MOFs) provide sufficient N-anchoring sites for the generation of Fe−N₄ moieties. A high Fe loading of 2.9 wt.% is readily achieved based on the scalable approach without post-treatment. Owing to the presence of highly exposed Fe−N−C sites and well-tuned pore structures, isolated Fe atoms on porous carbon nanofiber framework (Fe−SA/NCF) exhibits decent oxygen reduction activity and stability in alkaline conditions via a near four-electron path, demonstrating superior performance as air cathode for zinc-air batteries (ZABs) to commercial Pt/C catalyst.     

Improved Reversible Zinc Storage Achieved in a Constitutionally Crystalline-Stable Mn(VO3)2 Nanobelts Cathode

Rechargeable zinc-ion batteries (ZIBs) are potential for grid-scale applications owing to their safety, low price, and available sources. The development of ZIBs cathode with high specific capacity, wide operating voltage window and stable cyclability is urgently needed in next-generation commercial batteries. Herein, we report a structurally crystalline-stable Mn(VO₃)₂ nanobelts cathode for ZIBs prepared via a facile hydrothermal method. The as-synthesized Mn(VO₃)₂ exhibited high specific capacity of 350 mAh g⁻¹ at 0.1 A g⁻¹, and maintained a capacity retention of 92 % after 10,000 cycles at 2 A g⁻¹. It also showed good rate performance and obtained a reversible capacity of up to 200 mAh g⁻¹ after 600 cycles at 0.2 A g⁻¹ under −20 °C. The electrochemical tests suggest that Mn(VO₃)₂ nanobelts impart fast Zn²⁺ ions migration, and the introduction of manganese atoms help make the structures more indestructible, leading to a good rate performance and prolonged cycle lifespan.     

石墨烯负载的氧配位钴单原子稳定金属锂负极

Lithium (Li)-based batteries are the dominant energy source for consumer electronics, grid storage, and electrified transportation. However, the development of batteries based on graphite anodes is hindered by their limited energy density. With its ultrahigh theoretical capacity (3860 mAh∙g⁻¹), low redox potential (−3.04 V), and satisfactorily low density (0.54 g∙cm⁻³), Li metal is the most promising anode for next-generation high-energy-density batteries. Unfortunately, the limited cycling life and safety issues raised by dendrite growth, unstable solid electrolyte interphase, and "dead Li" have inhibited their practical use. An effective strategy is to develop a suitable lithiophilic matrix for regulating initial Li nucleation behavior and controlling subsequent Li growth. Herein, single-atom cobalt coordinated to oxygen sites on graphene (Co-O-G SA) is demonstrated as a Li plating substrate to efficiently regulate Li metal nucleation and growth. Owing to its dense and more uniform lithiophilic sites than single-atom cobalt coordinated to nitrogen sites on graphene (Co-N-G SA), high electronic conductivity, and high specific surface area (519 m²∙g⁻¹), Co-O-G SA could significantly reduce the local current density and promote the reversibility of Li plating and stripping. As a result, the Co-O-G SA based Li anodes exhibited a high Coulombic efficiency of 99.9% at a current density of 1 mA∙cm⁻² with a capacity of 1 mAh∙cm⁻², and excellent rate capability (high current density of 8 mA∙cm⁻²). Even at a high plating capacity of 6 mAh∙cm⁻², the Co-O-G SA electrode could stably cycle for an ultralong lifespan of 1300 h. In the symmetric battery, the Co-O-G SA based Li anode (Co-O-G SA/Li) possessed a stable voltage profile of 18 mV for 780 h at 1 mA∙cm⁻², and even at a high current density of 3 mA∙cm⁻², its overpotential maintained a small hysteresis of approximately 24 mV for > 550 h. Density functional theory calculations showed that the surface of Co-O-G SA had a stronger interaction with Li atoms with a larger binding energy, −3.1 eV, than that of Co-N-G SA (−2.5 eV), leading to a uniform distribution of metallic Li on the Co-O-G SA surface. More importantly, when matched with a sulfur cathode, the resulting Co-O-G SA/lithium sulfur full batteries exhibited a high capacity of 1002 mAh∙g⁻¹, improved kinetics with a small polarization of 191 mV, and an ultralow capacity decay rate of 0.036% per cycle for 1000 cycles at 0.5C (1C = 1675 mA∙g⁻¹) with a steady Coulombic efficiency of nearly 100%. Therefore, this work provides novel insights into the coordination environment of single atoms for the chemistry of Li metal anodes for high-energy-density batteries.     

Synthesis and selective recognition toward zinc ion of chiral poly(imine‐triazole)

A novel AB type of clickable monomer, (S)‐2‐[(2‐azido‐1‐phenylethylimino)methyl]‐5‐propargyloxyphenol (AMPP) was designed and polymerized to yield a class of main‐chain chiral poly(imine‐triazole)s through the metal‐free click reaction. With the thermally induced polymerization, the desired polytriazoles can be easily prepared in high yields by a stepwise heating‐up process and have the number‐average molecular masses ranging from 5.1 × 10³ to 58.1 × 10³ (polydispersity indices = 1.38?1.68). The polymers were characterized by Fourier Transform Infrared spectroscopy (FTIR), ¹H Nuclear Magnetic Resonance (NMR), and gel permeation chromatography, and their optical properties were studied by fluorescence and circular dichroism (CD) spectroscopies. As a chemosensor, these polymers exhibited a selective “turn‐on” fluorescence enhancement response toward Zn²⁺ ion over other cations such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Ag⁺, Pb²⁺, Cd²⁺, Hg²⁺, Mn²⁺, and Ni²⁺ in dimethyl sulfoxide. However, the Zn²⁺‐induced fluorescence signal was subject to serious interference by Al³⁺, Cu²⁺, Cr³⁺, and Fe³⁺ ions. Interestingly, the chiral polymer showed distinctive changes in the CD spectra on complexation with Zn²⁺, which allowed for the discrimination of this ion in the presence of other species tested including those interfering ions observed in the fluorescent detection. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2248–2257     

Novel sulfonated polyimide/ZrO2 composite membrane as a separator of vanadium redox flow battery

Sulfonated polyimide (SPI) and ZrO₂ are blended to prepare a series of novel SPI/ZrO₂ composite membranes for vanadium redox flow battery (VRFB) application. Results of atomic force microscopy and X‐ray diffraction reveal that ZrO₂ is successfully composited with SPI. All SPI/ZrO₂ membranes possess high proton conductivity (2.96–3.72 × 10^?2 S cm^?1) and low VO²⁺ permeability (2.18–4.04 × 10^?7 cm² min^?1). SPI/ZrO₂‐15% membrane is determined as the optimum one on account of its higher proton selectivity and improved chemical stability. The VRFB with SPI/ZrO₂‐15% membrane presents higher coulombic efficiency and energy efficiency than that with Nafion 117 membrane at the current density, which ranged from 20 to 80 mA cm^?2. Cycling tests indicate that the SPI/ZrO₂‐15% membrane has good operation stability in the VRFB system. Copyright © 2014 John Wiley & Sons, Ltd.